Optoma EP752 Podręcznik Użytkownika Pobierz pdf (Strona 48)

English

Appendices

Lamp Replacement Procedure:

1. Switch off the power to the projector by pressing the “Power/Standby”

button.

2. Allow the projector to cool down for at least 30 minutes.

3. Disconnect the power cord.

4. Press down and then pull the cover carefully. 

5. Open the top cover. 

6. Use a screwdriver to remove the 2 screws from the lamp module. 

7. Pull up the lamp handle. 

8. Remove the lamp module. 

To replace the lamp module, reverse the previous steps.

9. Turn on the projector and use “Lamp Reset” after the lamp module is

replaced.

Lamp Reset: (i)Press “Menu”  (ii)Select “Options”  (iii)Select

“Lamp settings”



(iv)Select “Lamp reset



(v)Select “Yes”.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 56 57

Brak uwag

Optoma EP752 Podręcznik Użytkownika Strona 48